3 results
Search Results
Now showing 1 - 3 of 3
- Mixed metal sulfides are increasingly being investigated because of their prospective applications for electrochemical energy storage and conversion. Their high electronic conductivity and high density of redox sites result in significant improvement of their electrochemical properties. Herein, the composition-dependent supercapacitive and water splitting performance of a series of Ni(1−x)CuxCo2S4 (0.2 ≤ x ≤ 0.8) solid solutions prepared via solvent-less pyrolysis of a mixture of respective metal ethyl xanthate precursors is reported. The use of xanthate precursors resulted in the formation of surface clean nanomaterials at low-temperature. Their structural, compositional, and morphological features were examined by p-XRD, SEM, and EDX analyses. Both supercapacitive and electrocatalytic (HER, OER) properties of the synthesized materials significantly vary with composition (Ni/Cu molar content). However, the optimal composition depends on the application. The highest specific capacitance of 770 F g−1 at a current density of 1 A g−1 was achieved for Ni0.6Cu0.4Co2S4 (NCCS-2). This electrode exhibits capacitance retention (CR) of 67% at 30 A g−1, which is higher than that observed for pristine NiCo2S4 (838 F g−1 at 1 A g−1, 47% CR at 30 A g−1). On the contrary, Ni0.4Cu0.6Co2S4 (NCCS-3) exhibits the lowest overpotential of 124 mV to deliver a current density of 10 mA cm−2. Finally, the best OER activity with an overpotential of 268 mV at 10 mA cm−2 was displayed by Ni0.8Cu0.2Co2S4 (NCCS-1). The prepared electrodes exhibit high stability, as well as durability.
- 1
- 16
- 0
- The development of cost‐effective and easily accessible bifunctional materials, which can be effectively used for energy storage and energy generation, is highly desirable. Herein, a new molecular precursor [tris(morpholinodithiocarbamato)Co(III)] has been synthesized and the X‐ray crystal structure of the complex determined. The precursor was used to prepare oleylamine (OLA)‐capped cobalt sulfide nanoplatelets, using a facile hot injection method at two different temperatures (200 °C and 260 °C). The characterization of the samples shows that CoS synthesized at 200 °C is slightly sulfur rich, whereas CoS synthesized at 260 °C is slightly cobalt rich. The effect of off‐stoichiometry of CoS nanoplatelets on the energy generation and storage applications was studied. The oxygen evolution reaction catalytic performance of both samples indicate overpotentials of 307 and 276 mV as well as Tafel slopes of 96 and 82 mV/dec, respectively. Similarly, overpotentials of 132 and 153 mV were observed for the hydrogen evolution reaction, with Tafel slopes of 159 and 154 mV/dec, respectively. The capacitive behavior of the samples was also examined, and specific capacitance values of 298 and 440 F/g were obtained with cycling stabilities of 73 and 97 %, after 5000 cycles, respectively. The results indicate that sulfur‐deficient CoS can show superior performance for efficient energy generation and storage devices.
- 1
- 4
- 0
- Ternary metal sulfides are currently in the spotlight as promising electroactive materials for high-performance energy storage and/or conversion technologies. Extensive research on metal sulfides has indicated that, amongst other factors, the electrochemical properties of the materials are strongly influenced by the synthetic protocol employed. Herein, we report the electrochemical performance of uncapped NiCo2S4 and CuCo2S4 ternary systems prepared via solventless thermolysis of the respective metal ethyl xanthate precursors at 200 and 300 °C. The structural, morphological and compositional properties of the synthesized nanoparticles were examined by powder X-ray diffraction (p-XRD), transmission electron microscopy (TEM), high-resolution TEM, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) techniques. Electrochemical studies indicate that NiCo2S4 nanoparticles synthesized at 300 °C exhibit superior energy storage characteristics with a high specific capacitance of ca. 2650 F g−1 at 1 mV s−1, as compared to CuCo2S4 nanoparticles, which showcased a specific capacitance of ca. 1700 F g−1 at the same scan rate. At a current density of 0.5 A g−1, NiCo2S4 and CuCo2S4 nanoparticles displayed specific capacitances of 1201 and 475 F g−1, respectively. In contrast, CuCo2S4 nanoparticles presented a higher electrocatalytic activity with low overpotentials of 269 mV for oxygen evolution reaction (OER), and 224 mV for the hydrogen evolution reaction (HER), at 10 mA cm−2. The stability of the catalysts was examined for 2000 cycles in which a negligible change in both OER and HER activities was observed.
- 1
- 1
- 0